Rotary Airlock DT Series
The Rotary Airlock DT Series meters product out of a hopper while isolating the air pressures on either inlet or outlet of the airlock. A typical applicaton for an airlock is to meter product into a convey line. This high performance rotary airlock/feeder offers the following features: high filling efficiency, sheared angle inlet and minimum air leakage. Shaft seals are suitable for products up to a temperature of 300 degrees with a maximum pressure differential of 29.4 PSIG (2 Bar).


  • Cast iron housing and end plates – Class 40, 220 Brinell
  • 9-Vane open ended, carbon steel, rotor consisting of >1/4” and <5/16” plate vanes continuously welded to cold rolled shaft
  • Sheared angle inlet
  • Maximum pressure differential of 29.4 PSIG
  • Class I clearances (0.004” to 0.005”) between the rotor and the housing/end plates
  • Outboard ball bearings, factory lifetime lubricated, with felt seals and concentric locking collar – 3000 F maximum operating temperature
  • External, packing gland type seals
  • Standard Grey enamel exterior


  • 316 Stainless steel housing and end plates
  • 304 or 316 Stainless steel rotor
  • Relieved (beveled) rotor tips and sides
  • Increased rotor clearances as required based on application (e.g., product, temperature, materials of construction, etc.)
  • Closed end rotor with end plate air purge
  • Teflon or Nedox coated rotor
  • Adjustable and replaceable rotor tips fabricated of hardened tool steel
  • Reduced capacity rotor
  • Interior of the housing and end plates coated with an electrically deposited layer of hard chrome
  • Inlet and outlet throats coated with an FDA epoxy
  • High temperature design (<4000 F)
  • Food grade, braided seals
  • Shaft seal air purge assembly
  • TEFC, X-Proof, Mill & Chem, High Efficiency, Premium Efficiency, Inverter Duty drive groups
Request a Datasheet
Rotary Airlock DT Series

Datasheet Request

* indicates a required field